• 3
  • 4
  • c1
  • c2
  • c3
Aerosols
Atomizers
Perfumes
Filling lines
Closing Machines

Atomizers
Perfumes

Find out more Aerozole
Automatic Machines Automatic Production Lines
close
movie Watch: Movies

Filling lines
Closing Machines

Aerozole
Filling
close
movie Watch: Movies

Pharma

Find out more Aerozole
close
movie Watch:

Zigmat

In this section we present you with equipment and ROTARY lines type "ZIGMAT".

 

ZIGMAT devices are equipped with an appropriate amount of operating heads depending on the production capacity:

- capacity up to 120 pcs/min - amount of operating heads - 6
- capacity up to 180 pcs/min - amount of operating heads - 9
- capacity up to 250 pcs/min - amount of operating heads - 12

In ZIGLER’s offer you will find a whole set of rotary equipment necessary to equip the production line. We offer full lines as well as individual elements such as:

- Feeding tables
- Filling modules
- Valve crimping modules
- Gas filling modules
- Test baths for leakage control
- Actuator placers
- Sorters and elevators
- Cap placers
- Checkweighers

Below we present content showing the operation of our rotary equipment - type ZIGMAT.

 

I. Working parameters:

Capacity:  7200 pcs/hour (120 pcs/minute)
Working pressure:  0,8 MPa (8 bar)
Supported valves:  1” male and female aerosol valve with dip tube (length 90÷300mm)
Supported containers diameter:  φ35 ÷ 66mm
Supported containers height:  100 mm ÷ 320 mm

II. Dimensions and weight:

Width:  1510 mm
Length:  3320 mm
Height:  2860 mm
Weight:  ~3500 kg

III. Supply parameters:

Supply type:  Pneumatic and electric
Required supply pressure:  0,8 ÷ 1,0 MPa (8 ÷ 10 bar)
Air consumption:  42 m 3 /h
Quality of compressed air:  IV-th  class  (according  to  ISO  8573-1)  for temperatures 15 ÷  35°C
Electric supply:  3x230 VAC 50 Hz
Power:  2.6 kW

I. Working parameters:

Capacity:  10800 pcs/hour (180 pcs/minute)
Working pressure:  0,8 MPa (8 bar)
Supported valves:  1” male and female aerosol valve with dip tube (length 90÷300mm)
Supported containers diameter:  φ35 ÷ 66mm
Supported containers height:  100 mm ÷ 320 mm

II. Dimensions and weight:

Width:  1510 mm
Length:  3320 mm
Height:  2860 mm
Weight:  ~3600 kg

III. Supply parameters:

Supply type:  Pneumatic and electric
Required supply pressure:  0,8 ÷ 1,0 MPa (8 ÷ 10 bar)
Air consumption:  63 m³ /h
Quality of compressed air:  IV-th  class  (according  to  ISO  8573-1)  for temperatures 15 ÷  35°C
Electric supply:  3x230 VAC 50 Hz
Power:  2.6 kW

I. Working parameters:

Capacity:  15000 pcs/hour (250 pcs/minute)
Working pressure:  0,8 MPa (8 bar)
Supported valves:  1” male and female aerosol valve with dip tube (length 90÷300mm)
Supported containers diameter:  φ35 ÷ 66mm
Supported containers height:  100 mm ÷ 320 mm

II. Dimensions and weight:

Width:  1510 mm
Length:  3320 mm
Height:  2860 mm
Weight:  ~3700 kg

III. Supply parameters:

Supply type:  Pneumatic and electric
Required supply pressure:  0,8 ÷ 1,0 MPa (8 ÷ 10 bar)
Air consumption:  84 m³ /h
Quality of compressed air:  IV-th  class  (according  to  ISO  8573-1)  for temperatures 15 ÷  35°C
Electric supply:  3x230 VAC 50 Hz
Power:  2.6 kW

 

 

Contact

ZIGLER POLSKA Sp. z o.o.
7 Braci Gutmanów st
(entrance at:17 Krakowska st)
43-600 Jaworzno - PL

tel. +48 32 616 36 70
tel. +48 600 248 079
e-mail: zigler@zigler.pl
e-mail: biuro@zigler.pl

www.zigler.pl

All rights reserved
© Zigler 2014

EN